We fix what's broken, fast, and we don't disappear after the invoice. Priority scheduling available across Mission and the surrounding zip codes.
Our Mission dispatcher asks a few quick questions to gauge urgency and get you the fastest available window.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
You won't find us buried under layers of call-center scripts — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, big or small.
Being local matters more than most companies let on. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Mission and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Mission is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Mission rooftop unit. We keep parts inventory stocked based on what actually fails most often on Mission's housing stock.
We cover the full range of heating, cooling, and air quality work Mission properties actually need.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Mission dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
Once a technician is on-site, the goal is always a same-visit repair — most emergency calls in Mission get resolved in a single trip, not a multi-day back-and-forth.
An aging system that's constantly breaking down usually costs more to keep patching than to replace. We walk Mission homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Most installs in Mission are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services multi-zone commercial buildouts across Mission, with service agreements built around your operating hours.
Property managers working with multiple Mission locations can set up a standing account so every site gets consistent service history and pricing.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Mission households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
We'd rather set clear expectations upfront than make vague promises we can't back up.
Details vary by job type and are always shared upfront, never buried in fine print.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
If anything feels off after we leave, one call gets a tech back to your Mission address.
A little attention to how your system is running can save you a lot of money and discomfort.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
Weak airflow from the vents often traces back to a clogged filter, a failing blower motor, or leaking ductwork.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
This is one of the warning signs we recommend not waiting on.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
You'll know the cost before a wrench touches your system.
Emergency calls get moved to the front of the line automatically.
Parts and labor are backed by warranty terms explained in plain language.
Every technician carries current state licensing and manufacturer training.
You make the final call — we just make sure you have the full picture.
Replacement systems don't have to be paid in one lump sum.
Every review below reflects an actual service call in the Mission area.
"The furnace stopped working overnight and someone was at our door before 9am. The pricing was exactly what they quoted over the phone."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. Never once felt like I was being upsold on something I didn't need."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. Followed up a week later just to check everything was still running fine."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Kept our kitchen running through the weekend rush."
"Got quotes from four different companies for a replacement and this was the only one that actually walked me through the load calculation. My energy bill dropped noticeably the first month with the new system."
"Diagnosed a failed capacitor and had it swapped within the hour. Genuinely relieved to have found a crew that answers when it matters."
None of these are unusual or embarrassing — they're just the normal wear and tear that comes with running a system through Mission's seasonal swings.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Our technicians train across the major residential and commercial equipment lines, so you're not limited to a single brand's service network. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Every tech on our Mission roster goes through background checks, licensing verification, and ongoing manufacturer training.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
Our policy is simple: you approve the number before we touch the system.
We staff after-hours dispatch specifically because HVAC failures rarely happen on a convenient schedule.
Every technician we send is licensed in accordance with Mission, TX requirements and carries full liability coverage.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
If you're unsure whether your address falls in our service area, a quick call to +1-866-805-8548 will confirm it.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Most Mission homes benefit from two tune-ups a year — one before cooling season and one before heating season.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
We'd rather quote it honestly on the phone than have you feel ambushed by the bill.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
Housing stock varies a lot across Mission — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
Larger properties get the same upfront pricing and licensed technicians as a single-family service call, just coordinated at scale.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Mission installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Mission proper and into the nearby zip codes listed below.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
